| DSP
Sine wave Home UPS |
|
600 VA
12 V DC |
|
800 VA 12 V DC |
|
1400 VA 24 V DC |
|
|
|
|
DSP
Based Design with absolute and stable Sine wave output
voltage and frequency |
|
|
State
of art MOSFET based PWM technology with greater efficiency
at Lower cost with Dynamic Stability |
Wide input voltage
range. |
Selector Switch
for Inverter/UPS |
Battery
High Protection. |
Over
Temperature Protection. |
Reverse
Phase protection as well as the display. |
| More backup being a Sine
Wave Inverter (ASIC Control). |
| Surge load capacity up to
300%. |
| Reverse Battery protection
as well as the Display |
| Battery Fuse Blown display |
| No humming Noise (Silent
Inverter) |
Inverter to mains change
over at zero crossing as well as Phase Synchronization
|
|
|
Power
Back up for House hold |
|
Domestic Computer
and its peripheral |
Emergency Power
Systems |
| Photography |
| Small Water pumps and all motor based
small applications. |
| Small Drills etc. |
T.V sets, Fans, Tube-Lights etc.
|
|
|
| Output Power |
800VA/600VA |
1400VA |
| Output Voltage At No Load |
220V±7 V |
220V± 7 V |
| Output Frequency |
50.0Hz ± 0.5Hz |
50.0 Hz ± 0.5Hz |
| Output wave Form |
Sine-Wave |
Sine-Wave |
| Battery Voltage |
12 V |
24 V |
| Low Battery Cut-Off |
10.4 ± 0.2 V |
20.0 ± 0.2V |
| Change Over Time Inverter to mains |
Aprx. 20msec |
Aprx. 20msec |
| Change Over Time Mains to Inverter |
Aprx. 30msec |
Aprx. 30msec |
| Input Voltage Range |
100V To 290V± 5V |
100V To 290V± 5V |
|
| Charger Current |
10.0 A ± 1A |
10.0 A ± 1A |
| Boost charging Voltage |
14.4 V ± 0.2V |
28.8V ± 0.2V |
| Trigger Charging Voltage |
13.6V ± 0.2V |
27.2V ± 0.2V |
| Charging Power Factor |
0.85* |
0.85* |
| Charging Technique |
Battery Level Auto Sense
Smart Charger |
Battery Level Auto Sense
Smart Charger |
|
| Change Over Time Inverter to Mains |
<=8msec |
<=8msec |
| Change over Time Mains to Inverter |
<=8msec |
<=8msec |
| Input Voltage Range |
180V To 260V ± 5V
|
180V To 260V ± 5V
|
|
| Display |
L.E.D |
L.E.D |
| Protections |
| Protections |
Thermal Shutdown |
Thermal Shutdown |
| Battery High cut |
Battery High cut |
| Battery Low Cut |
Battery Low Cut |
| Short Circuit/Overload |
Short Circuit/Overload |
| Reverse Phase |
Reverse Phase |
|
| Note: |
• |
* Conditions Apply
|
• |
** Technical
Specifications subjected to change without prior notice
for betterment of product |
• |
These are standard product, the
technical specifications for other models are same only
capacity and DC voltage is different. |
|
